IDK MSD-804FD Series Command Manual page 120

@SBA Set bitmap input channel assignment
Command @SBA, ch_1, input_1, bitmap_1 (, ch_2, input_2, bitmap_2
format
Return value
@SBA, ch_1, input_1, bitmap_1 (, ch_2, input_2, bitmap_2
format
Parameter ch_1-36 : Output
0 = All outputs, 1 = OUT1 to 4 = OUT4
input_1-36 : Input channel
0 = All inputs, 1 = IN1 to 9 = IN9
bitmap_1-36 : Bitmap assignment
0 = NONE [Default], 1 = Bitmap 1, 2 = Bitmap 2, 3 = Bitmap 3, 4 = Bitmap
4
*Only registered numbers can be specified as bitmaps.
Example Send
Receive
Send
Receive
Related info. 8.16.6 Input channel assignment
@GBA Get bitmap input channel assignment
Command @GBA, ch
format
Return value @GBA, ch, in_1, in_2, in_3, in_4, in_5, in_6, in_7, in_8, in_9
format
Parameter ch : Output
1 = OUT1 to 4 = OUT4
in_1-9 : Bitmap assignment of each input channel
0 = NONE [Default], 1 = Bitmap 1, 2 = Bitmap 2, 3 = Bitmap 3,
4 =Bitmap 4
Example Send
Receive
Related info. 8.16.6 Input channel assignment
@SBA,1,8,1 OUT1: Assign Bitmap 1 to IN8. (If you select IN8,
Bitmap 1 is output.)
@SBA,1,8,1 Terminated normally.
@SBA,2,8,1,9,2 OUT2: Assigns Bitmap 1 to IN8 and Bitmap 2 to
IN9. (If you select IN8, Bitmap 1 is output; if you
select IN9, Bitmap 2 is output.)
@SBA,2,8,1,9,2 Terminated normally.
@GBA,1
@GBA,1,0,0,0,0,0,0,0,1,0
120
MSD-804FD Users Guide (Command Guide)
･･･
)
･･･
)
Get bitmap assignment of OUT1.
OUT1: Bitmap 1 is assigned to IN8; other
input channels: no bitmap is assigned.