IDK MSD-804FD Series Command Manual page 114

@ECA Edit audio channel setting in cross point memory
Command @ECA, memory, a_1 (, a_2, a_3, a_4 )
format
Return value @ECA, memory, a_1 (, a_2, a_3, a_4 )
format
Parameter memory : Cross point memory
1 to 9
a_1-4 : Audio output
-1 = Not controlled, 0 = OFF, 1 = IN1 to 9 = IN9
Example Send
Receive
Related info. 8.13.3 Editing cross point
@GCA Get audio channel setting in cross point memory
Command @GCA, memory
format
@GCA, memory, audio_1 (, audio_2, audio_3, audio_4), name
Return value
format
Parameter memory : Cross point memory
1 to 9
audio_1-4
-1 = Not control, 0 = OFF, 1 = IN1 to 9 = IN9
Nothing is saved in the memory as factory default, the state is "-1" (Not controlled)..
If you save only video (@SCV) at the first saving of cross point settings, "-1" (Not
control) is replied for unsaved audio.
name : Memory name
Up to 10 characters using 20 to 7D. "2 ASCII codes"
Example Send
Receive
Related info. 8.13.3 Editing cross point
@RPM Load all settings from preset memory
@RPM, preset
Command
format
Return value @RPM, preset
format
Parameter preset : Preset memory
1 to 8
Example Send
Receive
Send
Receive
Related info. 8.13.4 Loading all settings
Caution Once you execute this command, all settings of video and audio I/O except some
environmental settings are updated.
@ECA,2,1,2,3,-1 If cross point memory 2 is loaded, OUT1 to 3 are
@ECA,2,1,2,3,-1
set IN1 to 3, respectively, and OUT4 is not
controlled.
: Audio output
@GCA,2 Get audio channel of cross point memory 2.
@GCA,2,3,1,2,4 With the name, "PATTERN2", the following settings
PATTERN2
are saved: OUT1: IN3; OUT2: IN1; OUT3: IN2;
OUT4: IN4.
@RPM,3
Load preset memory 3.
@RPM,3
Terminated normally.
@RPM,7
Preset memory without registered data cannot be
@ERR,3 loaded.
114
MSD-804FD Users Guide (Command Guide)