IDK MSD-804FD Series Command Manual page 106

@STL Set command key lighting
Command @STL, switch_1, led_1 (, switch_2, led_2
format
Return value
@STL, switch_1, led_1 (, switch_2, led_2
format
Parameter switch_1-5 : Command key
0 = All command keys,
1 to 5 = COMMAND A to E
led_1-5 : Lighting condition
0 = Lights if command is registered [Default],
1 = Lights during command execution
Example Send
Receive
Related info. 8.12.7 Command key lighting
@GTL Get command key lighting
Command @GTL, switch_1 (, switch_2
format
Return value @GTL, switch_1, led_1 (,switch_2, led_2
format
Parameter switch_1-5 : Command key
0 = All command keys,
1 to 5 = COMMAND A to E
led_1-14 : Lighting condition
0 = Lights if command is registered [Default],
1 = Lights during command execution
Example Send
Receive
Related info. 8.12.7 Command key lighting
@STL,2,1
COMMAND B: Lights during command execution.
@STL,2,1 Terminated normally.
･･･
)
@GTL,5 Get lighting condition of front panel COMMAND E.
@GTL,5,0 Lights if command is registered.
106
MSD-804FD Users Guide (Command Guide)
･･･
)
･･･
)
･･･
)