Display Devices On/Off - IDK MSD-804FD Series Command Manual

3.3.2 Display devices ON/OFF

@SDS
Command format
Return value
format
Parameter
Example
Related info.
Notes
@GDS
Command format
Return value
format
Parameter
Related info.
Set display power
@SDS, ch_1, onoff_1 (, ch_2, onoff_2
@SDS, ch_1, onoff_1 (, ch_2, onoff_2
ch_1-4 : Output
0 = All outputs, 1 = OUT1 to 4 = OUT4
onoff_1-4 : Display power switch
0 = OFF, 1 = ON
@SDS,1,1
Send
Receive @SDS,1,1
Send @SDS,1,0
Receive @ERR,10,1
7.3 Turning ON/OFF Display Devices
Since the result is sent after turning on/off the device, it may take a long time to
reply.
Get display power status
@GDS
@GDS, out_1 (, out_2 , out_3 , out_4)
out_1-4 : Power switch of each output monitors
0 = OFF, 1 = ON
Send @GDS
@GDS,1,1,0,1
Receive
7.3 Turning ON/OFF Display Devices
MSD-804FD Users Guide (Command Guide)
･･･
)
･･･
)
Turn on the display device connected to OUT1.
Terminated normally
Turn off the display device connected to OUT1.
If terminated abnormally, the error status and
output number are replied. (If several output are
controlled, several errors may be replied.)
Get the power switch status of a display device.
OUT3 is OFF; the other outputs are ON.
22