IDK MSD-804FD Series Command Manual page 57

@GEN Get HDCP output mode
Command @GEN
format
@GEN, outA_1 (, outA_2, outA_3, outA_4, outB_1, outB_2, outB_3, outB_4)
Return value
format
Parameter outA_1-4 : HDCP output of OUTA's each output
outB_1-4 : HDCP output of OUTB's each output
0 = HDCP is output only if input signals are HDCP compliant (HDCP INPUT
ONLY),
1 = HDCP is always output (ALWAYS [Default]),
2 = HDCP is not authorized (DISABLE)
* OUT1B to OUT4B can be got only if Cat5e/Cat6 output option is installed.
Example Send
Receive
Related info. 8.7.9 HDCP output
Get HDCP output.
@GEN
@GEN,1,1,1,0,1, OUT4A and OUT3B: HDCP is output only if input
1,0,1 signals are HDCP compliant. Other outputs: HDCP
is always output.
57
MSD-804FD Users Guide (Command Guide)