Component Parts; Input Shaft Assembly - Toyota Supra 1990 Manual

Snap Ring
MANUAL TRANSMISSION - Component Parts (Input Shaft Assembly)
MT-59
Input Shaft Bearing
E6253
IIIii'
09740
06618
COMPONENT PARTS
Input Shaft Assembly
COMPONENTS
Input Shaft
Synchronizer Ring
Needle Roller Bearing
WM0301
INSPECTION OF INPUT SHAFT
INSPECT SYNCHRONIZER RING
(a) Turn the ring and push it in to check the braking action.
"(b) Measure the clearance between the synchronizer ring
back and the gear spline end.
Standard clearance: 0.8 - 1.6 mm
(0.031 - 0.063 in.)
Minimum clearance: 0.6 mm (0.024 in.)
If the clearance is less than the limit, replace the synchroniz-
er ring.
REPLACEMENT OF BEARING
IF NECESSARY, REPLACE INPUT SHAFT BEARING
(a) Using snap ring pliers, remove the snap ring.