Toyota Supra 1990 Manual page 328

LU-12 LUBRICATION SYSTEM - Oil Pump
LU0529
LU0527
INSTALLATION OF OIL PUMP
(See page LU-7)
1. INSTALL OIL PUMP
(a) Install the oil pump with the bolt. Torque the bolt.
Torque: 220 kg-cm (16 ft-Ib. 22 N·m)
(bl Install the mount bolt holding the oil pump strainer stay
to block.
Torque: 60 kg-em (52 in-lb. 5.9 N ·m)
(cl Connect the outlet pipe with the union bolt.
Torque the union bolt and nut.
Torque: 350 kg-em (25 ft-Ib. 34 N ·m)
(dl Stake the lock washer.
2. INSTALL OIL PAN
(al Remove any packing material and be careful not to
drop the oil on the contacting surfaces of the oil pan
and cylinder block.
• Using a razor blade and gasket scraper. remove all
the packing (FIPGI material from the gasket
surfaces.
• Thoroughly clean all components to remove all the
loose material.
• Clean both sealing surfaces with a non-residue
solvent.
NOTICE: Do not use a solvent whieh will affect the paint-
ed surfaces.