Toyota Supra 1990 Manual page 149

TURBOCHARGER SYSTEM - Turbocharger TC-15
EM3273
EM3541
EM3540
EM3539
Front
...
o
EM3277
INSTALLATION OF TURBOCHARGER
(See page TC-9)
NOTICE: After replacing the turbocharger assembly. pour
approx. 20 cc (1.2 cu in.) of new oil into the oil inlet and
turn the impeller wheel by hand to splash oil on the bearing.
1. INSTALL TURBINE OUTLET ELBOW
Install a new gasket and the turbine outlet elbow with the
four nuts.
Torque: 440 kg-cm (32 ft-Ib. 43 N ·m)
2. INSTALL TURBO OIL PIPE
Install a new gasket and the turbo oil pipe with the two
nuts.
Torque: 130 kg-em (9 ft-Ib. 13 N ·m)
3. INSTALL NO.1 TURBO WATER PIPE
4.
Install a new gasket and the No.1 turbo water pipe with
the two nuts.
Torque: 75 kg-cm (65 in.-Ib. 7.4 N ·m)
INSTALL TURBOCHARGER
(a) Face the new gasket so the protrusion is facing the
rear and install on the exhaust manifold.
(b) Place a new gasket on the oil return hole of the cylinder
block.