Toyota Supra 1990 Manual page 414

MT-8
MANUAL TRANSMISSION - Removal and Installation of Transmission
u
Matchmarks
PR0134
9. CONNECT EXHAUST FRONT PIPE TO TAIL PIPE
(a) Connect the front pipe to the tail pipe, and torque the
bolts.
Torque: 440 kg-cm (32 ft-Ib, 43 N·m)
(b) Install the rubber hanger.
10. INSTALL PROPELLER SHAFT
(a) Align the matchmarks on both flanges.
(b) Install and torque the bolts.
Torque:
Propeller shaft flange
750 kg-cm (54 ft-Ib. 74 N·m)
Center support bracket
500 kg-cm (36 ft-Ib. 49 N·m)
11. FILL WITH TRANSMISSION OIL
Oil grade: API GL-4 or GL-5
Viscosity:
W58 MIT SAE 75W-90 or 80W-90
R154 MIT SAE 75W-90
Capacity:
W58 MIT 2.4 liters (2.5 US qts. 2.1 Imp. qts)
R154 MIT 3.0 liters (3.2 US qts. 2.6 Imp. qts)
12. INSTALL SHIFT LEVER
13. INSTALL CENTER CLUSTER FINISH PANEL
14. INSTALL NEGATIVE BATTERY CABLE
15. PERFORM ROAD TEST
Check for any abnormal noise or operation.