Toyota Supra 1990 Manual page 413

W58
MANUAL TRANSMISSION - Removal and Installation of Transmission MT-7
MT0228
MT0315 MT0303
MT0227
MT0226
2. INSTALL ENGINE REAR MOUNTING
Install the eight bolts, and torque them.
Torque: 250 kg-em (18 ft-Ib, 25 Nom)
3. INSTALL TRANSMISSION MOUNTING BOLTS AND
FLYWHEEL HOUSING UNDER COVER
Install and torque the bolts.
Torque:
Transmission mounting bolt 400 kg-em
(29 ft-Ib, 39 Nom)
Stiffener plate bolt 380 kg-em
(27 ft-Ib, 37 Nom)
4. INSTALL STARTER
Install the starter, and torque the bolts.
5. INSTALL CLUTCH RELEASE CYLINDER
Install and torque the two bolts.
Torque: 120 kg-em (9 ft-Ib, 12 Nom)
6. CONNECT BACK-UP LIGHT SWITCH CONNECTOR AND
REAR SPEED SENSOR CONNECTOR (wI A.B.S.)
7. CONNECT SPEEDOMETER CABLE
8. (R154)
INSTALL EXHAUST FRONT PIPE
(a) Install the exhaust front pipe and nuts to the exhaust
manifold. Torque the nuts.
Torque: 630 kg-em (46 ft-Ib, 62 Nom)
(b) Connect the exhaust pipe bracket to the clutch
housing.