Toyota Supra 1990 Manual page 441

Hide thumbs Also See for Supra 1990:

Table of Contents

MANUAL TRANSMISSION - Component Parts (Extension Housing)

Reverse Restrict Pin

INSPECT REVERSE RESTRICT PIN

Turn and push the reverse restrict pin by hand while ap-

plying direction.

INSTALL REVERSE RESTRICT PIN

Install the lever housing.

Using a pin punch and hammer, drive in the slotted

spring pin as shown.

Apply liquid sealer to the plug.

Part No. 08833-00080, THREE BOND 1344,

LOCTITE 242 or equivalent

Install and torque the screw plug.

250 kg-em (18 ft-Ib, 25 N·m)

REPLACEMENT OF BEARING

IF NECESSARY, REPLACE REAR BEARING OUTER RACE

Remove the outer race from the extension housing.

Using two screwdrivers, remove the snap ring.

Using SST, tap out the outer race.

SST 09608-12010 (09608-00020, 09608-00050)

Chapters

Table of Contents