Toyota Supra 1990 Manual page 311

COOLING SYSTEM - Radiator
CO-11
~--O-Ring
Core
C00351
C00348 C00362
~B:l---(2)
>----(1)
, r,
)--(3)
(4)-®\~;
(5)-®
( 6)
------crJ
/
C00341
C00348
(b) Pull the tank plates outward.
2.
REMOVE TANK AND O-RING
(a) Pull the tank upward.
3.
(b)
Remove the O-ring.
(AfT)
REMOVE OIL COOLER FROM LOWER TANK
(a)
7M-GE
Remove the pipes.
HINT: Make a note of the direction the pipes face.
(b)
Remove the nuts, spring washers, plate washers and
oil cooler.
(c) Remove the O-rings from the oil cooler.
ASSEMBLY OF RADIATOR
(See page CO-10)
1.
INSTALL OIL COOLER TO LOWER TANK
[7M-GE (AfT)]
(a) Clean the O-ring contact surface of the lower tank and
oil cooler.
(b)
Install new O-rings
(1)
to the oil cooler
(2).
(c) Install the oil cooler
(2)
with O-rings
(1)
to the lower
tank
(3).
(d) Install the plate washers
(4),
spring washers
(5).
and
nuts
(6).
Torque the nuts
(6).
Torque: 220 kg-em (16 ft-Ib, 22 N·m)