Toyota Supra 1990 Manual page 473

Hide thumbs Also See for Supra 1990:

Table of Contents

MANUAL TRANSMISSION - Component Parts (Output Shaft Assembly)

INSTALL SPACER AND FIRST GEAR ASSEMBLY

Install the spacer on the output shaft.

Apply gear oil to the needle roller bearing.

Assemble the 1 st gear, synchronizer ring and needle

roller bearing.

Install the assembly on the output shaft with the syn-

chronizer ring slots aligned with the shifting keys.

INSTALL STRAIGHT PIN AND FIRST GEAR THRUST

Install the 1 st gear thrust washer onto the output shaft with

the straight pin aligned with the 1 st gear thrust washer.

INSTALL OUTPUT SHAFT CENTER BEARING

Using SST, drive in the bearing with the outer race snap

ring groove toward the rear.

SST 09309-35010

10. MEASURE FIRST GEAR THRUST CLEARANCE

Using a feeler gauge, measure the 1 st gear thrust clearance.

Standard clearance:

Chapters

Table of Contents