Toyota Supra 1990 Manual page 125

45--0
Bolt Length
(mm)
ENGINE MECHANICAL - Cylinder Block EM-93
EM2997
EM1791
EM3036
20
LDr--Nut
EM2998
EM3035
9. INSTALL OIL PUMP DRIVE SHAFT
(a) While turning the drive shaft, insert slowly to avoid
damaging the drive shaft bearing.
(b) Install the bolt.
Torque: 130 kg-em (9 ft-Ib, 13 Nom)
10. INSTALL REAR OIL SEAL RETAINER
Install a new gasket and rear oil seal retainer with the five
bolts.
Torque: 130 kg-em (9 ft-Ib, 13 Nom)
11. INSTALL TIMING BELT CASE WITH WATER PUMP
(a) Position new gaskets on the cylinder block.
(b) Apply sealant to two or three threads of the 10 mm
bolt end.
Sealant: Part No. 08833-00070, THREE BOND 1324 or
equivalent
(c) Install the timing belt case with the seven bolts and
three nuts.
Torque:
1 2 mm head bolt and nut
195 kg-em (14 ft-Ib. 19 Nom)
14 mm head bolt
400 kg-em (29 ft-Ib. 39 Nom)
12. INSTALL OIL PAN
(See page LU-12)
13. INSTALL PS PUMP BRACKET