Toyota Supra 1990 Manual page 87

12 8 4
2 5
ENGINE MECHANICAL - Cylinder Head
EM-55
EM2961
EM2962
9 13
INSTALLATION OF CYLINDER HEAD
(See pages EM-32. 33)
1 . INSTALL CYLINDER HEAD
(a) Apply seal packing to the two locations shown.
Seal packing: Part No. 08826-00080 or equivalent
(b) Place a new cylinder head gasket on the cylinder
block.
NOTICE: Be careful of the installation direction.
(c) Place the cylinder head on the cylinder head gasket,
and connect the No.5 water by-pass hose to the
union.
(d) Apply a light coat of the engine oil on the threads and
under the cylinder head bolts.
(e) Using SST. install and uniformily tighten the fourteen
cylinder head bolts in several passes and in the se-
quence shown.
SST 09043-38100
Torque: 800 kg-cm (58 ft-Ib. 78 N ·m)
2. INSTALL CAMSHAFT TIMING PULLEYS AND TIMING
BELT
EX (See steps 8 to 11. and 14 on pages EM-29 to 31)
IN
14 10 6
3
7
11
EM2963
EM2922
3. INSTALL SPARK PLUGS
4. INSTALL CYLINDER HEAD COVERS
(a) Using SST. install the No.3 cylinder head cover.
SST 09923-00010
Torque: 180 kg-cm (13 ft-Ib. 18 N·m)