Precautions; Troubleshooting - Toyota Supra 1990 Manual

MANUAL TRANSMISSION - Precautions, Troubleshooting
MT-3
PRECAUTIONS
When working with FIPG material, you must be observe the following.
• Using a razor blade and gasket scraper, remove all the old packing(FIPG)material from the gasket surfaces.
• Thoroughly clean all components to remove all the loose material.
• Clean both sealing surfaces with a non-residue solvent.
• Apply the seal packing in approx. 1 mm (0.04 in.) bead along the sealing surface.
• Parts must be assembled within 10 minutes of application. Otherwise, the packing (FIPG) material must
be removed and reapplied.
TROUBLESHOOTING
Problem Possible cause Remedy Page
Noise Transmission faulty Disassemble and inspect transmission MT-4
Wrong oil grade Replace oil
Oil level low
Add oil
Oil leakage Oil level too high
Drain oil
Oil seal, a-ring or gasket worn or Replace oil seal, a-ring or gasket MT-4
damaged
Hard to shift or will Spline on input shaft dirty or burred Repair as necessary MT-4
not shift
Transmission faulty Disassemble and inspect transmission MT-4
Jumps out of gear Transmission faulty Disassemble and inspect transmission
MT-4