Toyota Supra 1990 Manual page 44

EM-12
ENGINE MECHANICAL - Engine Tune-Up
EM3311
(7M-GTE)
1. REMOVE NO.1 AIR CLEANER HOSE
2. DISCONNECT FOLLOWING CABLES AND ROD:
(a) Accelerator link
wi
cable
(b) Accelerator rod
(c)
(A/T)
Throttle cable
3. REMOVE ISC PIPE
(a) Disconnect the six hoses from
Ise
pipe.
(b) Remove the two bolts and
Ise
pipe.
4. REMOVE PCV PIPE WITH HOSES
(a) Disconnect the oxygen sensor wire from the two
clamps.
(b) Disconnect the No.4
pev
hose from the
pev
pipe.
(c) Remove the two bolts.
(d) Disconnect the
pev
pipe with hoses from the cylinder
head covers and throttle body.
5. REMOVE INTAKE AIR CONNECTOR
(a) Disconnect the air valve hose from intake air con-
nector.
(b) Loosen the clamp and remove the two bolt.
(c) Remove the intake air connector.