Toyota Supra 1990 Manual page 128

EM-96
ENGINE MECHANICAL - Cylinder Block
EM2965
EM6251
22. CONNECT FOLLOWING CONNECTORS AND WIRES:
(a)
ECU and ECT connectors
(b)
Ground strap to engine rear side
(c) Heater valve connector
(d)
(7M-GE)
Oxygen sensor connector
(e)
Alternator connector and wire
(f)
Main relay connector
(g)
(7M-GE)
Ignition coil connector
(7M-GTE)
Igniter connector
(h) (7M-GTE)
Solenoid resister connector
(i)
Check connector
(j)
Theft deterrent horn connector
(k)
Noise filter connector
(I)
Battery positive cable to battery
(m) Ground strap to LH front fender apron
23. CONNECT FOLLOWING HOSES:
(a)
Charcoal canister hose
(b)
Cruise control hose
(c)
Heater valve hose
(d)
Brake booster hose
24. INST ALL PS BELT
(See page MA-4)
25. INSTALL ALTERNATOR DRIVE BELT, WATER PUMP
PULLEY AND FLUID COUPLING
(See page CO-7)
26. INSTALL AIC BELT
(See page MA-4)
27. INST ALL RADIATOR
(See page CO-14)
28. (7M-GTE)
INSTALL NO.7 AIR CLEANER HOSE WITH AIR FLOW
METER AND AIR CLEANER CAP
(a) Connect the PS air hose.
(b)
Connect the air flow meter connector.
(c) Connect the three air hose and PCV hose.