SST
SST
(7M-GE)
(7M-GTE)
CL0221
CL0222
CL0404
CL0315
CLUTCH - Clutch Unit
CL-13
4.
INSPECT PILOT BEARING
Turn the bearing by hand while applying force in the axial
direction.
If the bearing sticks or has much resistance, replace the
pilot bearing.
5.
IF NECESSARY, REPLACE PILOT BEARING
(a)
Using SST, remove the pilot bearing.
SST 09303-35011
(b)
Using SST, drive in a new pilot bearing.
SST 09304-30012
6.
INSPECT DIAPHRAGM SPRING FOR WEAR
Using calipers, measure the diaphragm spring for depth and
width of wear.
Limit:
Depth
0.6 mm (0.024 in.)
Width
5.0 mm (0.197 in.)
If necessary, replace the clutch cover.