Toyota Supra 1990 Manual page 406

CL-16 CLUTCH - Clutch Unit
6. INSTALL BOOT, FORK AND RELEASE BEARING TO
TRANSMISSION
7 . INSTALL TRANSMISSION
(See page
MT -6)
(7M-GTE)
1.
INSTALL RELEASE BEARING HUB ASSEMBLY TO CLUTCH
COVER
(a) Apply
MP
grease to the release bearing contact
CL0517
surface.
~-------------------------=~
CL0322
(b) Install the plate washer, wave washer and bearing hub
assembly.
(c) Using a screwdriver, install the snap ring.
HINT: Support the release bearing under with a spacer
or such to raise the bearing hub assembly.
2.
INSTALL TRANSMISSION WITH CLUTCH COVER AND
DISC
(See page
MT-6)