Toyota Supra 1990 Manual page 112

Hide thumbs Also See for Supra 1990:

Table of Contents

ENGINE MECHANICAL - Cylinder Block

Inspect the oil clearance between the rod bushing and

• Using a caliper gauge, measure the inside diameter

of the connecting rod bushing.

Bushing inside diameter:

• Using a micrometer, measure the piston pin di-

Piston pin diameter:

• Subtract the piston pin diameter measurement from

the bushing inside diameter measurement.

Standard oil clearance:

Maximum oil clearance:

0.02 mm (0.0008 in.)

If the oil clearance is greater than maximum, replace the

bushing. If necessary, replace the piston and piston pin as-

IF NECESSARY, REPLACE CONNECTING ROD BUSHING

Using SST and a press, press out the bushing.

SST 09222-30010

Align the oil holes of a new bushing and connecting

Using SST and a press, press in the bushing.

SST 09222-30010

Chapters

Table of Contents