Starter - Toyota Supra 1990 Manual

• O-Ring
End Cover
STARTING SYSTEM - Starter
STARTER
COMPONENTS
Bearing
• O-Ring
I
F;.ld Fcom. 1F;.ld Co;rJ
~
Pinion Gear
Roller
ST-3
Armature
~ Retainer
~8 r
I
~
Magnetic Switch Assembly
~
:.)
t
~
Idle Gear
--(~
• Non-reusable part
STOOO4
Is,l,"
Starter Housing
Return Spring
Clutch Assembly
ST028S
REMOVAL OF STARTER
1. DISCONNECT CABLE FROM NEGATIVE TERMINAL OF
BATTERY
CAUTION: Work must be started after approx. 20 se-
conds or longer from the time the ignition switch is turned
to the "LOCK" position and the negative (-) terminal ca-
ble is disconnected from the battery.
2. DISCONNECT TWO WIRES FROM STARTER
Remove the nut and disconnect the battery cable from the
magnetic switch on the starter. Disconnect the other wire
from terminal 50.
3. REMOVE STARTER
Remove the two mounting bolts, and remove the starter
from the flywheel bellhousing.