Toyota Supra 1990 Manual page 91

ENGINE MECHANICAL -
Cylinder Head
EM-59
EM 3499
15. INSTALL AIR INTAKE CHAMBER WITH CONNECTOR
(a) Position a new gasket on the intake manifold.
(b)
(7M-GTE)
Connect the cold start injector connector.
(c) Install the intake chamber with connector and vacu-
um transmitting pipes with the two nuts and five bolts.
Torque: 180 kg-em (13 ft-Ib, 18 N·m)
(d) Connect the engine wire to the clamps of the intake
chamber.
(e) Install new gaskets and cold start injector tube.
Torque: To delivery pipe
300 kg-em (22 ft-Ib, 29 N ·m)
To cold start injector
180 kg-em (13 ft-Ib, 18 N·m)
(f) Install the EGR vacuum modulator to the bracket.
(g) (7M-GE)
Install the air intake connector bracket mounting bolts.
(h) (7M-GE)
Install the throttle body brackets.