IG-2
Check Connector
IGNITION SYSTEM -
Precautions
IGl156
PRECAUTIONS
1 .
Do not leave the ignition switch on for more than 10
minutes if the engine does not start.
2.
When a tachometer is connected to the system, connect
the tachometer test probe to the check connector termi-
nallG
8.
3.
As some tachometers are not compatible with this ignition
system, we recommended that you confirm the compati-
bility of your unit before use.
4.
NEVER allow the tachometer terminals to touch ground as
it could result in damage to the igniter and/or ignition coil.
5.
Do not disconnect the battery while the engine is running.
6.
Check that the igniter is properly grounded to the body.