Toyota Supra 1990 Manual page 418

Hide thumbs Also See for Supra 1990:

Table of Contents

MANUAL TRANSMISSION - Disassembly of Transmission

Remove the nine bolts.

Using a plastic hammer, tap the extension housing.

Disengage the shift and select lever from the shift

Pull out the extension housing.

REMOVE FRONT BEARING RETAINER AND BEARING

Remove seven bolts and front bearing retainer.

Using a snap ring pliers, remove two bearing snap

SEPARATE INTERMEDIATE PLATE FROM TRANSMISSION

Using a plastic hammer, carefully tap the transmis-

Pull the transmission case from the intermediate plate.

MOUNT INTERMEDIATE PLATE IN VISE

Use two long clutch housing bolts, plate washers and

suitable nuts as shown.

Install the plate washers in reverse of normal.

Increase or decrease plate washers so that the bolt tip and

the front tip surface of the nut are aligned.

Mount the intermediate plate in a vise.

Chapters

Table of Contents