Toyota Supra 1990 Manual page 252

FI-78
7M-GTE
7M-GTE
EFI SYSTEM - Fuel System
FI1993
FI2603
REMOVAL OF COLD START INJECTOR
1. DISCONNECT CABLE FROM NEGATIVE TERMINAL OF
BATTERY
CAUTION: Work must be started after approx. 20 se-
conds or longer from the time the ignition switch is turned
to the "LOCK" position and the negative (-) terminal ca-
ble is disconnected from the battery.
2. 17M-GE)
DISCONNECT COLD START INJECTOR CONNECTOR
3. DISCONNECT COLD START INJECTOR TUBE
(a) Put a suitable container of shop towel under the in-
jector tube.
(b) Remove the union bolt and two gaskets, and discon-
nect the injector tube from cold start injector.
HINT: Slowly loosen the union bolt.
4. REMOVE COLD START INJECTOR
(7M-GE)
Remove the two blots and cold start injector with the
gasket.
(7M-GTE)
Remove the two bolts and cold start injector with the
gasket, and disconnect the cold start injector connector.