Toyota Supra 1990 Manual page 88

EM-56 ENGINE MECHANICAL - Cylinder Head
EM2902
EM5897
~~\aH~-Protrusion
EM6264
(b) Apply seal packing to the cylinder head as shown in
the illustration.
Seal packing: Part No. 08826-00080 or equivalent
(c) Install the No.1 and No.2 cylinder head covers.
Torque: 25 kg-em (22 in.-Ib, 2.5 Nom)
(d) Install the heater hose clamp.
(e) Install the accelerator link.
5. INSTALL WATER OUTLET HOUSING
(a) Install a new gasket and water outlet housing with
the bolt and two nuts.
(b) Connect the No.6 water by-pass hose.
(c)
(7M-GE)
Install unions with No.4 water by-pass hose to the
water outlet housing with new gaskets and union
bolts.
6. INSTALL EXHAUST MANIFOLD
(a) Face a new exhaust gasket so the protrusion is fac-
ing the rear and install on the cylinder head.