Toyota Supra 1990 Manual page 329

A A
C
B
B
B B
A-A
B-B
C-C
~
~
r=u
LUBRICATION SYSTEM - Oil Pump
LU-13
C
LUOO93
F5235
(b) Apply seal packing to the cylinder block installing sur-
face of the oil pan.
Seal packing: Part No. 08826-00080 or equivalent
(c) Install the oil pan over the studs on the block with the
twenty four bolts and two nuts.
Torque the bolts and nuts.
Torque: 130 kg-em (9 ft-Ib, 13 N·m)
3. INSTALL FRONT SUSPENSION MEMBER
Install the front suspension member to the body.
Torque: 1,300 kg-em (94 ft-Ib, 127 N ·m)
4. INSTALL SHOCK ABSORBERS TO BODY
Install the shock absorber to the body with the three nuts,
torque the nuts.
Torque: 360 kg-em (26 ft-Ib, 35 N ·m)
5. INSTALL TEMS ACTUATOR
6. INSTALL ENGINE MOUNTING WASHERS AND NUTS
7. CONNECT STABILIZER BAR LINKS TO LOWER ARM
Torque: 650 kg-em (47 ft-Ib, 64 N·m)
8. CONNECT INTERMEDIATE SHAFT
Connect the intermediate shaft, torque the bolts.
Torque: 330 kg-em (24 ft-Ib, 32 N ·m)