Toyota Supra 1990 Manual page 489

MANUAL TRANSMISSION - Assembly of Transmission MT-83
D6691
RM0056
(c) Using a torx socket wrench, torque the screw plugs.
Torque: 190 kg-cm (14 ft-Ib, 19 N·m)
27 . INSTALL MAGNET TO INTERMEDIATE PLATE
28. DISMOUNT INTERMEDIATE PLATE FROM VISE
(a) Dismount the intermediate plate from the vise.
(b) Remove the bolts, nuts and plate washers.
29. INSTALL TRANSMISSION CASE
(a) Apply seal packing to the transmission case as shown.
Seal packing: Part No.08826-00090, THREE BOND
1281 or equivalent
(b) Align each bearing outer race, each fork shaft end and
reverse idler gear shaft end with the case installation
holes, and install the case.
If necessary, tap on the case with a plastic hammer.
30. INSTALL BEARING SNAP RINGS
Using snap ring pliers, install the two snap rings to the in-
put shaft bearing and counter gear front bearing.