Toyota Supra 1990 Manual page 433

Hide thumbs Also See for Supra 1990:

Table of Contents

MANUAL TRANSMISSION - Component Parts (Output Shaft Assembly)

INSTALL LOCKING BALL AND FIRST GEAR ASSEMBLY

Install the locking ball in the shaft.

Apply gear oil to the bearing.

Assemble the 1 st gear, synchronizer ring, needle roller

bearing and bearing inner race.

Install the assembly on the output shaft with the syn-

chronizer ring slots aligned with the shifting keys and

turn the inner race to align it with the locking ball.

INSTALL OUTPUT SHAFT CENTER BEARING

Using SST and a press, install the bearing on the output

shaft with the outer race snap ring groove toward the rear.

Hold the 1 st gear inner race to prevent it from

SST 09506-35010

MEASURE FIRST GEAR THRUST CLEARANCE

Using a feeler gauge, measure the 1 st gear thrust clearance.

Standard clearance:

Chapters

Table of Contents