Toyota Supra 1990 Manual page 43

ENGINE MECHANICAL - Engine Tune-Up
EM-11
EM3008
EM3007
(c) Install the throttle body brackets.
(d) Connect the throttle position sensor connector.
(e)
Connect following hoses:
• No. 7 air hose
• EGR vacuum modulator hoses
• BVSV hose
• VSV hose (for EGR)
(f) Connect the water by-pass hoses.
(g) Connect the accelerator connecting rod.
(h) Install the PCV pipe.
(i)
Connect following cables:
• (AfT)
Throttle cable
• Accelerator cable
• Cruise control cable
9. INSTALL NO.1 AIR CLEANER HOSE WITH AIR
CONNECTOR PIPE
10. FILL WITH COOLANT
(See page CO-5)