Toyota Supra 1990 Manual page 84

EM-52
o
o
Front Mark
ENGINE MECHANICAL - Cylinder Head
EM2999
I: Intake
E: Exhaust
EM2959
EM2927
(c) Coat all bearing journals with engine oil.
(d) Place the camshafts on the cylinder head as shown
in the illustration.
HINT: The exhaust camshaft has a distributor (7M-GE)
or cam position sensor (7M-GTE) drive gear.
(e) Apply seal packing to the areas indicated in the illus-
tration.
Seal packing: Part No.08826-00080 or equivalent
HINT: Install the No.1 bearing cap immediately after ap-
plying the seal packing.
(f) Place bearing caps on each journal with the front
marks pointing toward the front and in numerical order
from the front side.
(g) Temporarily install the bearing cap bolts in the
several passes in the sequence shown.
(h) Using SST, tap in the camshaft oil seal.
SST 09223-50010
HINT: Be careful not to install the oil seal slantwise.