Table of Contents
Advertisement
CL-10
CLUTCH - Clutch Release Cylinder
Lithium Soap Base Glycol Grease
~
~eJ
Cl0313
Cl0214
(
Cl0312
ASSEMBLY OF RELEASE CYLINDER
(See page CL-8)
1.
COAT PISTON WITH LITHIUM SOAP BASE GLYCOL
GREASE, AS SHOWN
2.
INSERT PISTON WITH SPRING INTO CYLINDER
3.
INSTALL PUSH ROD WITH BOOT
INSTALLATION OF CLUTCH RELEASE
CYLINDER
(7M-GE)
1 .
INSTALL RELEASE CYLINDER WITH TWO BOLTS
Torque:
120 kg-em (9 ft-Ib, 12 Nom)
2.
INSTALL FLEXIBLE HOSE
(a)
Install and torque the flexible hose to the release
cylinder.
Torque:
235 kg-em (17 ft-Ib, 23 Nom)
(b)
Using SST, connect and torque the clutch line union
to the flexible hose.
HINT:
First, finger-tighten and then tighten to specified
torque.
SST 09751-36011
Torque:
155 kg-em (11 ft-Ib, 15 Nom)
(c)
Install the clip.
3.
BLEED CLUTCH SYSTEM
(See page CL-4)
4.
CHECK FOR LEAKS
(7M-GTE)
1.
INSTALL RELEASE CYLINDER WITH TWO BOLTS
Torque:
120 kg-emn (9 ft-Ib, 12 Nom)
2.
INSTALL CLUTCH LINE TUBE
Using SST, connect the clutch line tube.
HINT:
First finger-tighten the union nut and then tighten
it to specified torque.
SST
09751-36011
Torque:
155 kg-em (11 ft-Ib, 15 Nom)
3.
BLEED CLUTCH SYSTEM
(See page CL-4)
L--_ _ _ _ _ _ _ _ _ _ _ _
C_lO_3---111
4.
CHECK FOR LEAKS
Advertisement
Chapters
Table of Contents
Troubleshooting
