Cam Position Sensor (7M-Gte - Toyota Supra 1990 Manual

• Non-reusable part
IGNITION SYSTEM -
Cam Position Sensor (7M-GTE)
IG-21
Dust Proof Cover
CAM POSITION SENSOR (7M-GTE)
COMPONENTS
• Straight Pin
~
• O-Ring
• Gear
Position Sensor Housing
Packing
IG0674
REMOVAL OF CAM POSITION SENSOR
1_ DISCONNECT CABLE FROM NEGATIVE TERMINAL OF
BATTERY
2_ DISCONNECT CAM POSITION SENSOR CONNECTOR
3_ SET NO.1 CYLINDER TO TDC/COMPRESSION
(a) Remove the oil filler cap_
(b) Look through oil filler hole and turn the crankshaft
clockwise until the cam nose can be seen.