Toyota Supra 1990 Manual page 422

Hide thumbs Also See for Supra 1990:

Table of Contents

MANUAL TRANSMISSION - Disassembly of Transmission

11. REMOVE SPEEDOMETER DRIVE GEAR

Pry out both ends of the clip and remove the drive gear.

12. MEASURE COUNTER FIFTH GEAR THRUST CLEARANCE

Using a feeler gauge, measure the counter 5th gear thrust

Standard clearance:

Maximum clearance:

0.46 mm (0.0181 in.)

13. REMOVE COUNTER REAR BEARING, SPACER, COUNTER

FIFTH GEAR AND NEEDLE ROLLER BEARING

Using snap ring pliers, remove the snap ring.

Using SST, remove the rear bearing, spacer, 5th gear

and bearing.

SST 09213-36020

Be careful not to catch the output shaft rear

bearing roller on the counter 5th gear.

Remove the spacer.

14. REMOVE NO.3 HUB SLEEVE ASSEMBLY

Using two screwdrivers and a hammer, tap out the

Chapters

Table of Contents