Toyota Supra 1990 Manual page 486

MT-80
/
MANUAL TRANSMISSION -
Assembly of Transmission
RM0081
RM0045
RM0094
RM0082
17. INSTALL NO.4 SHIFT FORK SHAFT. REVERSE SHIFT
HEAD AND NO.3 SHIFT FORK
(a) Place No.3 shift fork into the groove of No.3 hub
sleeve.
(b) Install No.4 shift fork shaft to No.3 shift fork. reverse
shift head and shift fork through the intermediate
plate.
(c) Install the locking ball into the reverse shift head.
18. INSTALL NO.3 SHIFT FORK SHAFT AND NO.1 SHIFT
FORK
(a) Using a magnetic finger and screwdriver, install the
locking ball into the intermediate plate.
(b) Install the interlock pin into the shaft hole.
(c) Place No.1 shift fork into the groove of No.1 hub
sleeve.
(d) Install No.3 fork shaft to the reverse shift fork and shift
head through the intermediate plate.
19. INSTALL NO.1 SHIFT FORK SHAFT
(a) Using a magnetic finger and screwdriver, install the
interlock pin into the intermediate plate.