Toyota Supra 1990 Manual page 356

IG-22
IGNITION SYSTEM - Cam Position Sensor (7M-GTE)
I GOB80
EM6252
(c) Turn the crankshaft counterclockwise approximate-
ly 120°.
(d) Turn the crankshaft again approximately 10° to 40°
clockwise so that the timing belt cover TDC mark and
the crankshaft pulley TDC mark are aligned.
4. REMOVE NO.4 AIR CLEANER PIPE WITH NO.1 AND NO.2
AIR CLEANER HOSES
5. REMOVE NO.7 AIR CLEANER HOSE WITH AIR FLOW
METER AND AIR CLEANER CAP
(a) Disconnect the three air hoses and PCV hose.
(b) Disconnect the air flow meter connector.
(c) Disconnect the PS idle up air hose.
(d) Loosen the clamps and remove the bolt.
(e) Remove the No.7 air cleaner hose with the air flow
meter and air cleaner cap.
6. REMOVE PS RESERVOIR TANK
Remove the two bolts. nut and reservoir tank with bracket.