Toyota Supra 1990 Manual page 61

Hide thumbs Also See for Supra 1990:

Table of Contents

ENGINE MECHANICAL - Timing Belt

INSTALL CRANKSHAFT PULLEY

Align the pulley set key with the key groove of the

Install the pulley.

Using SST to hold the crankshaft pulley, install and

torque the pulley bolt.

SST 09213-70010 and 09330-00021

2,700 kg-em (195 ft-Ib, 265 N·m)

CYLINDER TO TOC/COMPRESSION OF

Turn the crankshaft pulley and align its groove with the

"0" mark on the No.1 timing belt cover.

INSTALL CAMSHAFT TIMING PULLEYS

Align the timing pulley matchmark with the No.2 tim-

ing belt cover matchmark.

Install the timing pulley.

Install the pin to the hole.

• When replacing the camshaft or the camshaft timing

Align the center holes of the camshaft and timing pul-

leys, as shown in the illustration and insert the straight

• When reusing the camshaft or camshaft timing pulleys:

Checking that the straight pin hole position is in the same

position it was at disassembly, insert the straight pin.

Install the washer and pulley bolt.

Using SST to hold the pulley, torque the pulley bolt.

SST 09278-54012

500 kg-em (36 ft-Ib, 49 N·m)

Check that the matchmarks on the camshaft timing

pulley are aligned with those on the No.2 timing belt

Chapters

Table of Contents