Toyota Supra 1990 Manual page 482

MT-76 MANUAL TRANSMISSION - Assembly of Transmission
D6586
D6664
ASSEMBLY OF TRANSMISSION
(See pages MT-49. 50)
1.
INSTALL OUTPUT SHAFT TO INTERMEDIATE PLATE
(a) Install the output shaft into the intermediate plate by
pushing on the output shaft and tapping on the inter-
mediate plate.
(b) Using snap ring pliers. install the snap ring.
2.
INSTALL INPUT SHAFT
(a) Apply gear oil to the needle roller bearing and install
it into the input shaft.
(b) Install the input shaft to the output shaft with the syn-
chronizer ring slots aligned with the shifting keys.
3.
INSTALL COUNTER GEAR
Install the counter gear into the intermediate plate while
holding the counter gear. and install the counter rear bearing
with a plastic hammer.
4.
INSTALL REVERSE SHIFT ARM BRACKET
Install the reverse shift arm bracket and torque the bolts.
Torque:
185 kg-em (13 ft-Ib. 18 N·m)