Screw on and tighten the
5
/
" locknut on the cable sheath inside the foot box using two ½" wrenches.
16
The engine end will get installed later.
94-04 Fuel Injected Applications
Loosen the nut on the engine end of the accelerator cable with the cylinder slug on the end.
Put the accelerator cable in the stock accelerator bracket slot on the engine intake.
Tighten the nut against the bracket.
Put a dab of silicone on the rear edge of the rubber wipe then push the rubber wipe back onto the
threads.
156
www.factoryfive.com
508-291-3443