Irs Rear Coil-Over Shock Assembly - Factory Five Racing Mk4 Roadster Assembly Manual

Mount the lower arms to the chassis with the shock mount hanging down below the arm. The rear
bolt can be slip in place with no shims for now. Shim the front bolts using 3 shims on the front side of
the rod end on both the left and right arms.
Hand tighten the bolts for the lower control arms. The rod ends will be adjusted later.

IRS Rear Coil-Over Shock Assembly


Snap ring pliers, ¾" wrench, ¾" socket, ratchet, ruler, marker, hack saw.

Roadster/Coupe rear shock kit

The rear shocks are pre-valved at the factory in compression and rebound for good street use.
The shocks can be adjusted in rebound as per Koni's instructions if so desired. The rear springs
are 350lb. Other springs are available for different ride characteristics.

WARNING! Incorrect assembly and maintenance of this part can cause serious injury or death.
133
www.factoryfive.com 508-291-3443