87-93 Dash harness with air bag and fuse panel attachments.
Front Wiring Harness
Socket set, extension, regular, Phillips head screwdrivers, needle nose pliers, hammer, and
marker tape.
Front wiring harnesses.
Pull the rubber grommet out of the firewall into the engine bay.
Remove the front light harness from the engine bay wall working from the starter solenoid area to the
alternator. Unscrew any ground wires and mark the connectors (Especially the headlight and turn signal
lights) as you go.
41
www.factoryfive.com
508-291-3443