Factory Five Racing Mk4 Roadster Assembly Manual page 214

When the wire harness is installed, mount the fuse panel (Use the diagram in Appendix A to determine
the correct shape) to the 2"x 2" dash hoop support and between the two ¾" x ¾" frame tubes in the
driver's side footbox using the aluminum bracket provided and a few of the self-tapping screws.
The headlight switch can either be mounted in the dash to the left or right of the steering wheel, next to
the ignition or using the stock bracket, mount it to the 87-93 headlight switch mount bracket so that it
sticks vertically down under the dash.
Attach the harness across the 2"x 2" tube, using the insulated line clips.
The Mustang harness requires the stock Mustang key and PATS module. Use the ignition key provided
for the ignition
Tape or zip-tie the PATS module to the ignition ignition key.
213
www.factoryfive.com 508-291-3443