96-04 Mounting; Cooling System; 87-93 Fan Mounting - Factory Five Racing Mk4 Roadster Assembly Manual

Hide thumbs Also See for Mk4 Roadster:

Table of Contents

96-04 Mounting

If you are going to run a vapor line and a fuel evaporative canister (charcoal can), mount the can at the

back of the car on the driver side using the stock bracket so that the stock plastic line will still reach the

correct connection. Note: Splash guards are not mounted until after the body is on.

" and ⅜" sockets, ⅛",

Tape Measure, Marker, Tin snips.

Fan mounting components, Stainless Radiator Hose kit, Mustang fan shroud with overflow

reservoir, Mustang radiator, insulated clip hardware, packaged aluminum.

Make sure the electric fan shroud does not bend/oval or it will cause the fan blades to hit. Do not

lean on the fan shroud while engine is running as this may bend shroud and cause fan blade to hit

Remove the radiator reservoir using a

" drill bits, drill, Phillips head screwdriver, rivet gun, Hack Saw,

www.factoryfive.com

508-291-3443