Brake switch parts.
Place a bucket under the Hydro-booster.
Label all hoses that attach to the hydro booster.
Disconnect the hoses draining them into the bucket.
Attach tape to the brake lines and mark their positions on the master cylinder and distribution block.
Remove the four bolts that connect the hydro boost mount and pedal box to the firewall
On the Hydro-booster, remove the snap ring in front of the retaining nut inside the car
Remove the nut that retains the hydro booster to the firewall using the tool provided with the kit.
Remove the Hydro-booster/Master cylinder assembly from the car.
Thread the retaining nut back onto the booster and reattach the snap ring so they do not get lost.
Drain the power steering fluid from the pump.
31
www.factoryfive.com
508-291-3443