Factory Five Racing Mk4 Roadster Assembly Manual page 310

Clean the dash off with some brake cleaner or acetone and spray the front surface and the back surface
of the dash pad with adhesive. (3M super 77 or super 90 work great).
Stick the dash to the pad leaving about an inch border all around the top, the bottom will be bigger for
the flange. Taping the ends of the pad helps to keep it flat.
After giving the front adhesive time to set spray the bottom flange and pad and adhesive them together.
This is a fairly tight corner so hold the dash in position with pressure on the mating surface with some
full paint cans or something else heavy.
309
www.factoryfive.com 508-291-3443