Factory Five Racing Mk4 Roadster Assembly Manual page 350

Hide thumbs Also See for Mk4 Roadster:

Table of Contents

Drivers side arm plate with arms attached

Driver side Hinge Assembled.

Attach the hinge arms to the arm support plate as shown using the ⅜" shoulder bolts, spacers, nylon lock

nuts and washers. The spacer fits over the bronze bushing after it is pressed into the arm holes. The

flange of the bronze bushings should contact the arm plate. Tighten the nuts and then back off until the

arms rotate easily.

If you tighten the nut tight and the arm still moves easily then back off the nut and adjust the

www.factoryfive.com

508-291-3443