94-04 Pedal Box - Factory Five Racing Mk4 Roadster Assembly Manual

Reinstall the pedal box assembly in the driver's footbox; use the ¼"x 1.50" screws from the pedal box
fastener assembly with a fender washer next to the head. Leave all the hardware hand tight.

94-04 Pedal Box

Position the Mustang pedal box over the two angled ¾" tubes over the driver's feet, the clutch pedal
goes to the left of the tubes and the brake pedal goes between the tubes.
Attach the pedal box using two short ⅜" bolts and two washers to the front wall at the front of the foot
box.
The right hole for the master cylinder must also be marked on the pedal box. Use the laser cut hole in
the foot box steel as a guide to mark the Mustang pedal box.
If not already done, mark the corner of the pedal box that sticks out past the front foot box plate. This
will have to be trimmed.
Remove the pedal assembly.
Use a 7 / " drill bit to drill the bolt hole in the pedal box for the master cylinder bolt.
16
The front foot box aluminum panel can now be siliconed and riveted in place with the ⅛" long rivets.
153
www.factoryfive.com 508-291-3443