Intake Hose And Air Filter - Factory Five Racing Mk4 Roadster Assembly Manual

Attach the engine end of the cable sheath to the cable mount on the engine using ⅜" and
Put a dab of silicone on the rear edge of the rubber wipe then push the rubber wipe back onto the
threads.
Push the ball stud retainer onto the ball stud.
Push/pull the cable into the retainer so that the cable is tight.
Tighten the set screw in the retainer using a
Check the full range of the accelerator pedal travel to ensure that there are no interferences with the
pedal or travel.

After driving the car for the first time you may want to adjust the pedal locations for optimum
heal/toe and shoe size differences.

Intake hose and Air Filter

Slide the large hose clamp onto the intake hose.
Slide the mass air end of the intake hose over the intake end.
Position the hose clamp over the joint. Do not tighten, this will be done on the car. Modified 1997
intake hose shown
5 / " hex key.
64
268
www.factoryfive.com 508-291-3443
/ " wrenches.
7 16