Fasten the shock to the top mount with the fasteners and 0.675" spacers provided and torque both upper
and lower mounts to 40 ft-lbs.
Spindles
13
/
" socket, Torque wrench, Needle Nose Pliers, Rubber Mallet
16
IFS components, Mustang Spindles.
Make sure the grease boot is in place on the lower balljoint then mount the spindle to the lower control
arm.
Attach the castle nut and torque the balljoint to 106-149Nm (80-110 lbft) and install a new cotter pin
from the IFS components assembly.
IFS Bracket
IFS components, Mustang strut bolts
Attach the Spindle adapter bracket to the upper control arm to the spindle using the factory strut bolts
and torque to 135-149Nm (100-110 lbft).
99
www.factoryfive.com
508-291-3443